Completed quickly and followed instructions given. Grammar, spelling, etc. was all good as well. Thank you so much! Will hire in the future.
EVALUATING THE QUALITY OF DATA FROM A COMMERCIAL LAB
You’ve recently graduated with a bachelor’s degree in environmental engineering sciences from the University of Florida, and got hired by AECOM, a multinational engineering firm that provides design, consulting, and management services. After a few months in your tenure at AECOM, the company receives funds to develop a remediation strategy for soil contaminated by high levels of chromium (Cr), copper (Cu), and arsenic (As) due to historic use of woods preserved with a pesticide containing the above listed chemicals – and known as CCA-treated wood. The project requires some basic knowledge of analytical chemistry applied to environmental matrices. Based on your academic transcripts, you have been asked to act as “Project Manager”. However, to meet the project’s objectives, you need the services of commercial laboratories for different analyses you cannot conduct in house. The following is an example scenario you are facing.
Experiments. Your research team has been conducting batch sorption studies to identify efficient sorbent materials for the removal of Cr, Cu, and As from soil water. Using corroded metallic iron (CMI) particles as example sorbent material, experiments mixed contaminated soils with CMI in specific ratios and each treatment conducted in triplicates. Next, water was added to the sorbent-soil mixtures to simulate acid rain and to induce metal leaching from soil’s particles to soil solutions. Leached Cr, Cu, and As would then get adsorbed onto CMI, and at the end of the experimental contact time, the CMI particles and metal bound to them retrieved by magnetic separation using magnets. Samples of used soils were taken before and after treatment with CMI and sent to a commercial lab for the determination of the concentrations of Cr, Cu, and As.
The following is a table of relevant information your research team submitted with the samples to the commercial lab.
Table 3.1. Sample treatment types, masses of untreated soils (control), and of CMI-treated soils.
Sample ID
Triplicates
Tested CMI/Soil ratios
(g of CM/g of soil)
Mass of soil submitted for analysis
(g)
Observations
Control
C1
N/A
10
These are non-treated contaminated soils
C2
N/A
10
C3
N/A
10
Treatment-1
T1A
1/20
10
These soils samples were reacted with CMI and after a 2-hour contact time to allow metal adsorption, the CMI were retrieved by magnetic separation
T1B
1/20
10
T1C
1/20
10
Traetment-2
T2A
5/20
10
T2B
5/20
10
T2C
5/20
10
Treatment-3
T3A
10/20
10
T3B
10/20
10
T3C
10/20
10
After one week, you get the data back from the commercial lab and the report reads as follows (See next page).
VOODOOSCIENCELAB
Michael Reyes, Manager
Isabella Robby, Analyst
April 16, 2017
Dear Customer:
We have completed the analysis of your samples. Please find below the analytical results and relevant quality assurance (QA) and quality control (QC) information. If questions arise, please feel free to get in touch with our chemical analysis team.
We appreciate your business and look forward to your patronage in the future.
Sincerely,
For the Voodoo Science Lab Team,
M.R.
MiChael Reyes
Table 3.2. Concentrations of chromium, copper, and arsenic in submitted soil samples. All samples were acid digested at sub-boiling temperature for 12 hours, diluted with ultrapure water, filtered through a 0.45 mm filter membrane to remove solid particles, and analyzed by inductively coupled plasma (ICP-MS). A certified reference material was used for verification of digestion recovery efficiency. In addition, reagent blanks and standard solutions were analyzed for QA/QC purposes.
Sample ID
Triplicates
Tested CMI to Soil ratios
(g of CM/g of soil)
Chromium
(Cr)
Copper
(Cu)
Arsenic
(As)
Control
C1
N/A
250.21
1122.01
75.89
C2
N/A
275.33
1075.99
81.02
C3
N/A
260.27
1201.22
79.99
Treatment-1
T1A
1/20
100.15
200.12
250.77
T1B
1/20
99.03
201.52
149.88
T1C
1/20
101.78
199.02
151.00
Traetment-2
T2A
1/4
30.22
20.13
415.17
T2B
1/4
31.33
19.71
312.99
T2C
1/4
29.79
18.99
353.45
Treatment-3
T3A
1/2
1.89
8.13
51.03
T3B
1/2
2.05
9.75
62.99
T3C
1/2
1.75
7.01
61.50
QUESTION:
First, you need evidence of good quality control/quality assurance (QA/QC) information so you can trust the data. Second, you need these results to establish differences between controls and treatments on one hand, and between any two of the 3 treatments on the other – so that best experimental conditions can be determined. Therefore, based on the above data report:
1. Based on your current knowledge in environmental analysis, provide a bulleted list of all flaws you can identify in these results.
2. Write a technical letter (not to exceed 2-pages) to the Commercial Lab to request necessary data and relevant information for an adequate QA/QC evaluation. In your letter, and for each one of the requested items, clearly state how the latter would be used to help with data interpretation and/or for publication purposes. Be brief and straight to the point. (Hint—you should show that you have a good understanding of the analytical process in general, and that you know what it takes in terms of QA/QC for analytical data to be considered acceptable).
Delivering a high-quality product at a reasonable price is not enough anymore.
That’s why we have developed 5 beneficial guarantees that will make your experience with our service enjoyable, easy, and safe.
You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.
Read moreEach paper is composed from scratch, according to your instructions. It is then checked by our plagiarism-detection software. There is no gap where plagiarism could squeeze in.
Read moreThanks to our free revisions, there is no way for you to be unsatisfied. We will work on your paper until you are completely happy with the result.
Read moreYour email is safe, as we store it according to international data protection rules. Your bank details are secure, as we use only reliable payment systems.
Read moreBy sending us your money, you buy the service we provide. Check out our terms and conditions if you prefer business talks to be laid out in official language.
Read more